BGPDD - ASC 2-N STRIPPER
- MSDS: BGPDD
- Manufacturer: ALLOY SURFACES CO INC
- Product Name: ASC 2-N STRIPPER
- National Stock Number: 6850-01-152-5991
Product Identification
Product ID:ASC 2-N STRIPPER
MSDS Date:12/20/1989
FSC:6850
NIIN:01-152-5991
MSDS Number: BGPDD
Responsible Party
WILMINGTON, DE 19809-3513
US
Emergency Phone: 302-762-8900
Info Phone: 302-762-8900
Cage: 3A367
Contractor
Telephone: 302-762-8900 / 302-762-7213
Cage: 3A367
Ingredients
FLUORIDE SALT(AMMONIUN BIFLUORIDE FROM DATA ENTRY 07MAR88)
Fraction By Weight: 95.0%
OSHA PEL 2.5 MG/M3
ACGIH TLV: 2.5 MG/M3
ORGANIC COMPOUND
Fraction By Weight: <1.0%
Hazards
Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:YES
Health Hazards Acute and Chronic:CAUSE EYE BURNS,CAUSE SEVERE SKIN
IRRITATION & FLUORIDE-LIKE BURNS WHICH MAY NOT BE IMMEDIATELY
EVIDENT; INHALATION CAUSES SEVERE IRRITATION TO UPPER RESPIRATORY
TRACT; HARMFUL IF INGESTED.
First Aid
First Aid:EYE:FLUSH WITH PLENTY OF WATER FOR AT LEAST 30 MIN,DO NOT USE
ZEPHIRAN CHLORIDE SOLN ON EYES; SKIN:FLUSH WITH COLD WATER FOR 15
MIN,USE ALKALINE SOAP,USE AQUEOUS ZEPHIRAN CHLORIDE SOLN FOR
30-60MIN; I NH:REMOVE TO FRESH AIR,GIVE OXYGEN IF BREATHING IS
DIFFICULT; ING:DO NOT INDUCE VOMITING,GIVE LARGE QUANTITIES OF
WATER.NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:NONE
Extinguishing Media:NOT COMBUSTIVLE.USE PROPER MEDIA FOR SURROUNDING
FIRE.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:MAY RELEASE TOXIC EMISSIONS.
Accidental Release
Spill Release Procedures:IF NOT CONTAMINATED,SCOOP UP FOR TE-USE; IF
CONTAMINATED.SCOOP OR VACUUM INTO CONTAINER FOR DISPOSAL. AVOID
DUSTING.
Handling
Handling and Storage Precautions:AVOID BREATHING DUST.DO NOT GET IN
EYES,SKIN OR ON CLOTHING. WASH THOROUGHLY AFTER HANDLING.KEEP AWAY
FROM FOOD & FEED PRODUCT.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:GENERAL VENTILATION & LOCAL EXHAUST.
Protective Gloves:RUBBER/NEOPRENE GLOVES
Eye Protection:CHEMICAL GOGGLES
Supplemental Safety and Health
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:463F/239.5C
Melt/Freeze Pt:M.P/F.P Text:259F/126C
Decomp Temp:Decomp Text:>662F,>350C
Spec Gravity:1.503
Solubility in Water:58.3 GM/100 GM WATER
Appearance and Odor:BLUE CRYSTALS, PINE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,STRONG ALKALI
Stability Condition to Avoid:HIGH TEMPERATURES
Hazardous Decomposition Products:HF(IF CONTACT STRONG ACIDS); NH*3(IF
CONTACT STRONG ALKALI).
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL,STATE &
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.